Whipple releases 12-14 Jeep Cherokee SRT 6.4L Supercharger kit!

Whipple Superchargers is proud to announce the release of the 2012-2014 Jeep Cherokee SRT supercharger kit. The new 2.9 liter front feed supercharger system running 8.5psi of boost makes a whopping 570+rwhp from the stock 395rwhp! Each kit comes with an oversized true-flow oval filter and cold air intake system, high flow fuel injectors, oversized heat exchanger, oversized intercooler reservoir, MSD fuel pump booster with programmable voltage curve, massive air-to-water intercooler and industry leading front feed design (without a comprimised shaft in the intake path)! Nobody packs more power and more performance as the Whipple system for the Hemi 6.4L engines! More power per dollar than any other system, the true Whipple advantage!

Some exclusive features:

  • No other upgrades required, just massive power right out of the box
  • Front entry W175ax (2.9 liters) Whipple twin-screw supercharger that significantly outperforms competitions 1.9L and 2.3L roots-type systems
  • Front feed supercharger utilizes precision ground helical cut gears vs a problematic belt or shaft through the inlet that causes massive VE loss
  • Massive high flow cold air intake system included
  • Integrated Crusher™ 109mm round inlet outflows smaller 90 and 93mm inlets such as other Eaton based systems
  • Integrated Crusher ™ 109mm round inlet for optional oversized throttle bodies
  • Integrated design allows for oversized intercooler core compared to other smaller intercooler cores giving Whipple lower air charge temps which allows more boost and timing to be run on pump gas
  • Massive super high-density air-to-water aluminum bar-plate intercooler with offset air-fin offers more cooling than any other positive displacement system available
  • Massive aluminum intercooler reservoir holds more than double the IC water than any of the competitors, more water, more power
  • Whipple Superchargers massive oversized intercooled air-bypass system for industry leading reduction of burst knock and incredible fuel economy, no ridiculous fabbed steel tubes or systems that circulate hot air
  • Self-contained oversized oil system for dramatically reduced oil temps in even the most demanding conditions
  • Exclusive 3×5 rotor combo for significant increase in airflow under the curve than less efficient 4×6 rotor combo
  • One-turn turn inlet allows for decreased induction losses when compared to rear inlet systems and 180deg bends
  • Center discharge port for better cylinder to cylinder distribution then other twin-screws with cobbled together billet adapters and forward facing discharge
  • Discharge down design allows for less pressure loss which gives more power at lower boost levels
  • Top mount design allows for cooler operation then upside down SC’s that conduct heat from engine and are trapped by runners and covers, causing hotter manifold temps and less power per pound of boost
  • More boost at the “hit” than any other twin-screw
  • Flat torque curve for incredible acceleration
  • MSD ™ Fuel pump booster with pre-defined voltage curve for less pump duty cycle then other pump boosters, only supplies increased voltage when needed, others are on/off
  • MSD ™ Fuel pump booster voltage curve can be adjusted by user, no need to purchase “competition” version, already included
  • Oversized heat exchanger for incredible intercooler water temps
  • No internal engine modifications required
  • Completed installation looks factory installed
  • Kits come complete with all necessary parts and hardware for installation
  • Unique oil level sight glass for easy oil level and quality check, no dipstick to bind or misread
  • Plug and play wiring with male and female connections
  • Optional high flow air filter system featuring a S&B True flow filter
  • 65lb/hr High flow fuel injectors included
  • Proven 6-rib belt system with adjustable idler system for easy belt changes and multiple pulley configurations
  • Stainless steel jack-shaft with unique plastic cover (or optional carbon fiber) for increased safety
  • OEM quick connect fittings for easy installation, no ugly brass or steel fittings on the SC
  • Complete kits, Tuner kits and Hot Rod kits are available
  • Available in wrinkle black, polish or any custom color
  • Easily upgradeable with big cold air intakes and bigger throttle bodies
  • Instant boost at the touch of the throttle
  • 3 minute pulley changes
  • SCT Flash tool that allows you to read and erase codes and multiple data log features
  • 1 year warranty

*Kits are currently not legal in the state of California and are intended for offroad use only.

 

Whipple DYNO Jeephttp://whipplesuperchargers.com/index.php?dispatch=news.view&news_id=10

Advertisements

Leave a comment

July 22, 2014 · 12:32 PM

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s