Category Archives: Vortech

Vortech 2011 Mustang Supercharger System

The new 2011 Mustang GT brings back a heritage that many of us muscle car guys grew up with known as the “Five Point Oh”. From the street to the race track, the 5 liter Ford engine has been an icon for decades. In fact, much of the reputation Vortech has built up over the years is directly as a result of the power and reliability that our customers have enjoyed from our early model 5.0L systems. This legendary platform has been the springboard for most of our supercharger breakthroughs. From the inaugural V-1 A-Trim, to the first quiet operating V-2 SQ, to the (still) unmatched and untouchable V-7 YSi-Trim, and even to the self-lubricated V-3 Si-Trims of today, the Vortech Supercharger has always been the best choice for Mustang enthusiasts all over the world. It is for that reason, even though some companies may feel comfortable repackaging the same old 4.6L kit from 2005, Vortech does not. This new 5.0L Vortech system is specifically engineered around the completely redesigned engine in the 2011 GT. Utilizing the V-3 supercharger, horsepower gains per psi will eclipse competitor’s models due to pure, unadulterated efficiency. That’s 78% adiabatic efficiency for you tech-heads out there, which we would compare to the other guys’ efficiency numbers if they even had the equipment to test for it…but they don’t. The included air-to-air charge cooler is significantly larger than other offerings, translating into more effective charge cooling right out of the box, and substantially higher horsepower support on modified vehicles. The mounting location of this larger intercooler is far superior as well, placing it directly at the lower bumper opening where it can be most effective, instead of behind the bumper where it will get little to no airflow across it. The air inlet ducting, a stylishly well designed roto-molded piece draws air from the stock airbox, instead of directly over the hottest point in the engine compartment. This benefit will not only all but guarantee 50 state emissions legality for this system, but will also allow for larger MAF and CAI selection down the road.

You’d better mark this system down on your modification “To Do” list now, before you’re the last one without one!

Can be purchased at http://www.SuperchargersOnline.com (Tel: 818-518-9889)

Click Here for Pricing and more Info

Advertisements

Leave a comment

Filed under Vortech

Vortech Lysholm Supercharger Tuner System for 2010-2011 Chevy Camaro SS with 6.2L

Camaro TUNER supercharger systems are equipped with a Lysholm 2300AX twin-screw supercharger compressor. This package includes a cast aluminum lower manifold with ports that match OEM size, location and shape. Integrated into the compressor is an air bypass valve assembly and actuator. The drive assembly includes black anodized billet aluminum tensioner mounting plates with idles, belts and all necessary hardware. Custom fuel rails assemblies with braided stainless steel crossover hose and -6 AN fuel fitting. To top it off Lysholm uses a closed-loop air/water charge cooler system. Integrated dual-pass weld aluminum cooler core, high-volume water circulation pump and storage tank with hoses, clamps and plumbing.

Can be purchased at http://www.SuperchargersOnline.com (Tel: 818-518-9889)

For additional information please Click Here

Leave a comment

Filed under Lysholm

Vortech Air Inlet Upgrade Assembly for 2007-2009 Ford Shelby GT500


Vortech Air Inlet Upgrade Assembly

Lysholm 3300 with optional Vortech air inlet upgrade and throttle body.

This high-flow air inlet assembly replaces all components upstream of the throttle body. Compatible with: OEM GT500 supercharger, Ford Racing TVS supercharger, Lysholm 3300 supercharger, OEM and most aftermarket throttle bodies (except Kenne-Bell).

Included Components:

  • 123mm MAF housing (Vortech 8A003-111)
  • High flow air filter (6” diameter flange mount x 9” long)
  • 5” silicone sleeves (matte black exterior) with appropriate stainless hose clamps
  • Anodized aluminum MAF mount / heat shield
    • High-quality, 100% carbon fiber composite inlet duct (Vortech V4LFR112-020)
    • Seamless pre-preg bladder molded layup
    • 2 x 2 twill weave
    • Integrated breather and bypass fittings designed to mate-up with OEM hoses
    • 5” diameter inlet attachment to 123mm MAF outlet

Can be purchased at http://www.SuperchargersOnline.com (Tel: 818-518-9889)

Click here for more info

Leave a comment

Filed under Lysholm

Vortech VTS Supercharger Kit for 2008-2009 GM Truck with 5.3L

Established in 1990, Vortech Engineering, LLC offers a variety of automotive performance products including complete supercharging systems, fuel system components and air-to-water aftercoolers for domestic and import vehicles plus marine applications.

The patented, VTS twin-screw design provides tire shredding low-end torque as well as far greater efficiency and horsepower gains compared to traditional (and newer) roots-type blowers. Boost levels over 20 PSIG are possible.

Features

  • Vortech VTS Supercharger 2.3L Twin-Screw Compressor
  • Custom Vortech Manifold with built in Air-to-Water Intercooler and integrated By-pass Valve
  • Custom Vortech Fuel Rail with High Flow Injectors
  • Hand Held DiableSports Programmer
  • All Hoses, Belts, and Hardware
  • High Flow Air Filter
  • 8.5psi of boost

Can be purchased at http://www.SuperchargersOnline.com (Tel: 818-518-9889)

Click here for more info

Leave a comment

Filed under Lysholm

Vortech Hemi Race Bypass Valve Upgrade

Our new bypass valve upgrade is a direct bolt-on to the Vortech V-3 HEMI supercharging system, (using existing sleeves, clamps and bypass signal hose), replacing the standard bypass valve. It’s perfect for those owners seeking maximum horsepower through an increase in boost pressure. The Maxflow Bypass Valve improves supercharger operation by opening to relieve unwanted pressure during deceleration. Flow is rated at 320 CFM at 8 PSIG and the valve is preset to open at 4-5 inches of vacuum.

The kit includes an aluminum discharge tube with welded bypass flange mount, Maxflow Race Bypass Valve with gasket and mounting hardware plus a bypass discharge filter.

Can be purchased at http://www.SuperchargersOnline.com (Tel: 818-518-9889)

Click here for more info

Leave a comment

Filed under Vortech