Tag Archives: Cold Air Intake

2015 Mustang Cold Air Intakes with Serious Power Advantages

roushblog1

A cold air intake is arguably the most common bolt-on modification across the board. It’s rare to come across even a lightly-modified Mustang that hasn’t had one installed (except maybe in California). So what’s the hype? Why is it one of the first modifications that Mustang owners choose to purchase and install? The answer is simple – it’s the first step to unlocking untapped potential regardless of the power plant under your hood. They’re also reasonably priced and super easy to install. And now, with ROUSH’s new line-up of Cold Air Intake Kits for the 2015 Ford Mustang, you have an even better reason to add one to your list of modifications.

Just recently, we put each of our 2015 Ford Mustang Cold Air Intakes to the test on our dynamometer and we have the resulting real-world horsepower and torque increase numbers for you! Mustangs equipped with the 5.0L power plant saw gains of 10.4 horsepower and 8.54 lb-ft of torque, while the V6’s power output increased by 10.52 horsepower and 9.8 lb-ft of torque. Finally, the Mustang’s EcoBoost four-cylinder engine saw incredible power gains of up to 29.6 horsepower and 27.89 lb-ft of torque.

roushblog2

So how do Cold Air Intakes work? Cold air is denser than warm air – molecules are closer together in cold air, meaning there is more oxygen in a specific unit of cold air than there is in the same unit of warm air. To be clear, it’s oxygen that your engine needs to burn fuel efficiently, not air. In turn, greater cold airflow unlocks a higher potential for power and fuel efficiency. Think of it this way – when you walk outside in cool weather, it’s easy to take a deep breath of air, but when you walk outside on a hot day, the air feels thicker and it might seem to be more difficult to take a deep breath. Your engine breathes in much the same way as you and I do.

roushblog3

That being said, ROUSH Performance’s Cold Air Kits help your 2015 Mustang breathe better – whether you opted for an EcoBoost, V6, or V8. For the first time, these kits utilize something called ROUSH “Dry” Filter technology. The reusable filters are built and proven to retain their shape under high airflow, and are composed of inner and outer layers of wire mesh to guarantee durability and reliable support of the double layers of media within.  Each layer of media does a separate job: the outermost layer is composed of specifically-designed synthetic needle-felt polyester designed for wet and dry filtration to capture any major contaminants, and the inner layer is made of wet-laid/chemical bonded rayon/polyester, to capture remaining contaminants. All of this filtering might lead you to believe that airflow is restricted, but this is not the case at all – in fact, the filter offers less restriction than comparable kits, as well as a reduction in pressure drop.

roushblog4

Along with increasing the performance of your Mustang, ROUSH Cold Air Kits will slightly change your Mustang’s rumble, and they look much sleeker than the stock air box under the hood.

ROUSH Mustang Cold Air Kits are engineered and tested to ensure that calibration changes are not necessary, and factory mounting locations, emissions, hardware, and vacuum lines are utilized to allow for easy installation. As always, 2015 ROUSH Mustang Cold Air Kits are protected by a 90-day ROUSH Parts Warranty and will be available for order in July 2015. The air filter with the clamp, injection-molded lower air box/tray with installed EPDM foam hood seal, Blow Molded clean air tubes, heat extractor foam insert, and all required mounting hardware are included with the kit, which is proudly manufactured in the USA.

Now you know the benefits of installing a ROUSH Cold Air Kit on your Mustang (we also offer F-150 cold air intakes) so you can make an educated purchase. Just remember, these kits do NOT fit ROUSHcharged vehicles as they are designed with their air box as a complete package.

2015 Mustang EcoBoost Cold Air Kit

2015 Mustang V6 Cold Air Kit

2015 Mustang V8 Cold Air Kit

Advertisements

Leave a comment

Filed under Uncategorized

Vortech Competition Air Inlet Upgrade for 2011 Ford Mustang GT

This high-flow CAI accessory kit for the 2011 Mustang GT allows for higher airflow, boost and horsepower gains compared to systems utilizing the factory airbox. Provides an additional 20 to 40HP on top of a 605HP V-3 Si-Trim installation, and allows for up to 825HP with a T-Trim, or up to 1000HP with a V-7 JT-Trim and additional modifications.

Bolts onto all Vortech and Paxton branded 2011 5.0L Mustang supercharger systems (custom tuning required).

Included Components and Features

Accessory kit consists of open airbox (roto-molded plastic), rubber hood seal, large cone-style filter, bellmouth-entry filter adapter, silicone coupler, instructions, and all required mounting hardware.

Replaces OEM air filter cover, filter and base. Mounts in OEM location and style, and mates to OEM body-mounted cold air snorkel.

When compared to the OEM airbox, gains of approximately 0.6-1.0 psig in peak boost can be anticipated (when mated to a stock vehicle utilizing the standard Vortech/Paxton pulley ratio). Greater gains can be realized on applications with a more aggressive pulley ratio and/or engine modifications.

Custom Tuning and Fuel Pump Booster Required

Due to the increased volume of airflow that this product will allow, a custom ECU calibration and fuel pump/pump booster upgrade is required in order to maintain an acceptable air/fuel ratio.

Vortech Competition Air Inlet Upgrade for 2011 Ford Mustang GT – Click Here

For more information, please visit www.SuperchargersOnline.com, Tel: 818-518-9889

Leave a comment

Filed under Vortech

Vortech Air Inlet Upgrade Assembly for 2007-2009 Ford Shelby GT500


Vortech Air Inlet Upgrade Assembly

Lysholm 3300 with optional Vortech air inlet upgrade and throttle body.

This high-flow air inlet assembly replaces all components upstream of the throttle body. Compatible with: OEM GT500 supercharger, Ford Racing TVS supercharger, Lysholm 3300 supercharger, OEM and most aftermarket throttle bodies (except Kenne-Bell).

Included Components:

  • 123mm MAF housing (Vortech 8A003-111)
  • High flow air filter (6” diameter flange mount x 9” long)
  • 5” silicone sleeves (matte black exterior) with appropriate stainless hose clamps
  • Anodized aluminum MAF mount / heat shield
    • High-quality, 100% carbon fiber composite inlet duct (Vortech V4LFR112-020)
    • Seamless pre-preg bladder molded layup
    • 2 x 2 twill weave
    • Integrated breather and bypass fittings designed to mate-up with OEM hoses
    • 5” diameter inlet attachment to 123mm MAF outlet

Can be purchased at http://www.SuperchargersOnline.com (Tel: 818-518-9889)

Click here for more info

Leave a comment

Filed under Lysholm